Cet exemple de vérification est basé sur l'exemple de vérification 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Un système à un degré de liberté avec un jeu et deux ressorts est initialement fléchie. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. le poids propre est négligé. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Une structure à travée simple sur deux niveaux est soumise à des charges sismiques. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Cet exemple sert de démonstration du couplage de diaphragme. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Un système à double masse est composé de deux puits et de deux masses représentées par les moments d’inertie correspondants, concentrés dans une distance donnée sous forme de masses nodales. The left shaft is fixed, and the right mass is free. Neglecting the self‑weight of the shafts, determine the torsional natural frequencies of the system.
Un oscillateur à double masse est constitué de deux ressorts et de masses linéaires, qui sont concentrés aux nœuds. The self-weight of the springs is neglected. Determine the natural frequencies of the system.